Published at Sunday, 03 February 2019. Kitchen Window and Ventilation Hood. By Osvald Henriksen.
GE went out of its way to advise range-hood installers of the best way to install a water heater or a furnace — that is, by following ASHRAE standards. Why didn’t GE bother to tell range-hood installers that ASHRAE also has something to say about the best way to install a range hood?
Broan recommends installing an outdoor air duct connected to a grille mounted on the kitchen wall or connected directly to the return plenum of your furnace; the motorized damper is installed in the duct. One 8-inch-diameter duct works for a range hood rated up to 1,000 cfm. If your range hood is bigger than that, you’ll need two ducts.
Some Passivhaus builders are experimenting with range-hood fans that don’t exhaust air to the exterior. Instead, they pull air from above the stove and pass it through a charcoal filter before returning the air to the kitchen. On the ceiling of the kitchen, in a location as far from the stove as possible, they also install a grille connected to the exhaust system of the home’s HRV.
Any content, trademark’s, or other material that might be found on the Acaysha website that is not Acaysha’s property remains the copyright of its respective owner/s. In no way does Acaysha claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Acaysha. All Rights Reserved.